10m IP65 Waterproof 5050 RGB LED Strip Light Kit
IP65 Flexible Silicone with Adhesive Back - 10mm
SKU: OP1130b
$69.95
RRP $169.00
In Stock
10m IP65 Waterproof 5050 RGB LED Strip Light Kit
IP65 Flexible Silicone with Adhesive Back - 10mm
Red, Green and Blue IP65 Waterproof LED Strip Light kit comes with a 10 metre 5050 SMD LED strip with 300 LEDs, 12V DC Power Supply Adpater and an infra-red LED controller.
A 10 metre 5050 SMD LED strip with 300 LEDs. Flexible ribbon is extremely versatile and suitable for automotive or interior decor lighting. Evenly spaced spot lighting along its length provides a continuous linear light form. It can be cut and rejoined every 50mm along its length allowing it to be custom cut to virtually any size and application.
Tri-colour 5050 SMD LEDs in Red/Green/Blue for full spectrum colour, including white, lighting effects with the IR Controller box. Excellent for automotive interiors, etc.
Features:
- Weather resistant IP65 Adhesive back 3M Brand
- Clear silicone strip 10 x 2.8mm Total Length 10 Metres
- Can be cut into 50mm lengths with 3 LEDs each.
- 450 Lumens/M, 500mA/M, 60 LEDs/M (per metre)
- LED 5050x300 total. CE, ROHS and UL certified
- Terminates to two wires. 12Vdc @ 5A Total 5M
- 450 lumens per metre
- 10mm wide x 2.8mm high
12 Month Warranty
| SKU | OP1130b |
| Barcode # | 9351634065288 |
| Brand | Aus Electronics Direct |
| Shipping Weight | 0.5000kg |
| Shipping Width | 0.200m |
| Shipping Height | 0.050m |
| Shipping Length | 0.150m |
| Shipping Cubic | 0.001500000m3 |
| Unit Of Measure | ea |
RGB LED Strip Light Kit Review
By: Ian Singleton on 17 February 2025I purchased this to replace a strip light for an outdoor garden wall feature. The old strip light had lasted for 10 years but had ceased working. The staff at Aus Electronics Direct were very helpful and spoke with me about other strip light kits that were available before I settled on this one. It was easy to install and as the light kit is outside in the elements I covered the controller with some tape to prevent water damage. You need to be close to the IR receiver when using the remote control unit otherwise the signal will not reach. No instructions were included in the kit but it is straightforward enough to follow what to do. Good unit at a reasonable price.
(5)
